Anchor bolts and fasteners for steel structures

European manufacturer of specialist fasteners. Industry expertise since 1971

Foundation anchor bolts and fasteners for steel structures

We manufacture and supply threaded rods, holding down bolts, HV and SB bolting assemblies and hot-dip galvanized fasteners for demanding structural connections to EN 1090, EN 14399 and EN 15048 - with full control of mechanical properties, coatings and inspection documentation.

If you are responsible for the load-bearing capacity of connections, compliance with the execution design or the on-time acceptance of a steel structure - you are in the right place.

Anchoring steel structures and bolted connections

We manufacture and supply fasteners that carry real loads in industrial halls, industrial facilities, and power transmission towers and masts. Anchoring a steel hall and anchoring steel columns in concrete require elements with a confirmed strength class - we supply anchor bolts for steel columns together with material documentation. We support projects to EN 1090 and verify the selection of structural bolts in classes 8.8 and 10.9 against the design loads.

Anchoring steel structures and bolted connections

Threaded rods

For durable anchoring in foundations, connecting load-bearing elements and precise adjustment during assembly.

HV and SB bolts

HV bolts EN 14399 and SB bolts EN 15048 for preloaded and non-preloaded connections in steel structures to EN 1090.

Effect: Stable connections and smooth technical acceptance.

Holding down bolts and anchor bolts for steel columns in concrete

We supply elements used in the main load-bearing joints of steel structures, where preloaded connections and foundation anchorage determine the safety of the whole structure.

When anchoring a steel structure in concrete, the selection of foundation bolts (holding down bolts) and structural bolts of the right strength class is critical. That is why we check the elements before they are delivered to site.

Holding down bolts and anchor bolts for steel columns in concrete

We verify strength class 8.8 / 10.9

We check that HV bolts EN 14399 and SB bolts EN 15048 match the design preload forces and the requirements of structures to EN 1090.

We control the coating

We match hot-dip galvanizing to the required coating thickness and its effect on thread tolerance.

We cut threaded rods to length

We prepare cast-in anchor bolts for anchoring steel columns in concrete without reducing the load-bearing capacity of the cross-section.

We deliver complete assembly sets

Bolt + nut + washers as one consistent set - with no risk of mixing batches.

We keep the documents in order

3.1 inspection certificates, declarations of conformity and material batch traceability.

Effect: No downtime and full compliance with the design.

Manufacturer of structural bolts and anchor bolts for steel structures

What we do differently

We are not only a distributor. We manufacture fasteners for steel structures, including threaded rods for foundation anchorage and drawing-based parts made for individual projects.

Manufacturer of structural bolts and anchor bolts

Own machining shop

We make threaded rods in non-standard lengths, diameters and coatings, as well as other non-standard fasteners to drawing.

Materials and processing of structural steel

We work with grades intended for preloaded connections and anchorage, checking mechanical properties against the design requirements. For corrosive environments we supply stainless steel fasteners - A2 for atmospheric conditions, A4 for coastal and chemical zones.

Control over the process

From raw material to finished product - with full material traceability.

Effect: Assembly that matches the design - with no compromise on quality.

Certified HV preloaded bolts EN 14399 and SB bolts EN 15048

We know the specifics of structural steel. We manufacture elements from certified materials for anchoring structures, as well as fasteners for steel structures working in load-bearing connections. We carry out complete steel processing - from cutting to hot-dip galvanizing - so that bolts for steel structures and foundation anchor bolts keep their full load-bearing capacity under load.

HV bolts EN 14399 and SB bolts EN 15048

HV and SB bolts

Certified bolts for load-bearing connections in classes 8.8 and 10.9 with repeatable mechanical properties for structures to EN 1090: HV high-strength structural bolting assemblies for preloading to EN 14399-4 and SB non-preloaded structural bolting assemblies to EN 15048.

Foundation anchor bolts

As a manufacturer of made-to-measure foundation anchor bolts, we make foundation rods for concrete without affecting the structure of the steel and supply them as complete assembly sets.

Drawing-based parts

Our own machining shop processes special materials and makes non-standard fixing parts under strict tolerance control.

Hot-dip galvanised structural bolts (HDG)

We supply HV and SB bolts and other fasteners hot-dip galvanized. For special orders and customer-supplied parts, we carry out hot-dip galvanizing in our own plant. We match the coating thickness to the operating conditions of the structure and check the thread fit after galvanizing.

Effect: Confidence that the processed material will carry loads for years.

CE marked bolting assemblies - documentation for EN 1090-2

In steel structures, the documentation of fasteners is an integral part of the delivery. Certified bolts for load-bearing connections and foundation anchor bolts for concrete must come with the full set of documents required for the acceptance of structures to EN 1090.

CE marked bolting assemblies - documentation for EN 1090-2

What you get in the package with the fasteners

Proof of quality

3.1 material certificates for every batch delivered.

Confirmed conformity

Declarations of Performance (DoP) and CE marking for fasteners used in steel structures to EN 1090.

Acceptance support

We arrange additional testing and 3.2 certificates with an external inspection body.

Strict control

Full traceability of the production batch, from the steel mill to delivery on site.

Value: A complete set of documents that closes the formal side on site.

Who we work for

We supply fasteners for steel structures to general contractors, steel structure fabricators and erection companies building load-bearing structures and industrial infrastructure. Our projects include:

Who we work for

Anchoring of load-bearing structures and machinery

We manufacture structural anchor bolts and threaded rods for fixing steel columns and machine bases, designed for anchoring in concrete according to the project requirements. Anchor bolts for steel structures are supplied cut to length, with a material certificate.

Power poles, transmission towers and masts

We supply bolts for steel structures, including HV preloaded bolts and SB non-preloaded bolting assemblies, available hot-dip galvanized (tZn) for outdoor use.

Industrial halls, warehouses and buildings

Certified bolts for load-bearing connections and complete fasteners for steel structures to EN 1090.

Support structures and frames made of hollow sections

Fasteners for hollow sections, including blind bolts for places without access from both sides.

Effect: Stable structures ready for smooth technical acceptance.

Connecting major projects

Projects: fasteners for manufacturers of poles, towers, masts and overhead line fittings

Anchor bolts, bolting assemblies and hot-dip galvanized fasteners supplied as complete sets, with the documentation required by the project.

Towers and masts

We supply

  • Anchor bolts
  • HV and SB bolting assemblies
  • Bolts, nuts and washers
Lighting, telecom and power poles

We supply

  • Anchor bolts
  • HV and SB bolting assemblies
  • Bolts, nuts and washers
Overhead power line fittings

We supply

  • Hot-dip galvanized bolts and nuts
  • Special bolts and nuts
  • Pins

Have a project?

Don't let a fastener be the reason for downtime.

Steel structure project
Send inquiry

Send us your bill of materials.
We will verify the classes and coatings and prepare a quote.

Frequently asked questions

Which bolts are used in the load-bearing joints of steel structures?

The most heavily loaded joints of steel structures use HV preloaded bolts to EN 14399, which provide the required stiffness and safety of the frame. Less demanding, non-preloaded lap joints use SB bolting assemblies to EN 15048. For smooth acceptance, certified bolting assemblies with the required documentation, such as a Declaration of Performance (DoP), should be used.

Can foundation anchor bolts be made to the project specification?

Yes, foundation anchor bolts can be made to the project specification. As a manufacturer of made-to-measure anchor bolts, we supply elements cut precisely to size and ready for installation. Ready-made anchor rods make casting into concrete easier and remove the need to extend elements on site, which helps avoid downtime.

How do you protect structural bolts against corrosion outdoors?

Structural bolts used outdoors in environments with increased corrosivity are best protected by hot-dip galvanizing (tZn). The thick zinc coating gives long-term resistance to changing weather conditions. With hot-dip galvanized bolts, the thread fit has to be controlled in production so that the elements can be assembled smoothly on site.

Which anchor bolts are used for foundation anchoring of steel structures?

Foundation anchoring of steel structures uses threaded rods cast into concrete - class 8.8 for most load-bearing structures and 10.9 where the design assumes the highest forces. The choice depends on the pull-out and shear forces in the execution design, so we verify the material class against the bill of materials before delivery.

What holding down bolts are used for steel columns on a concrete foundation?

Steel columns of halls and support structures are fixed to concrete foundations with threaded foundation bolts (holding down bolts), matched to the hole diameter in the base plate and the thickness of the foundation. We supply them cut to length together with nuts and washers as one set, so no extension is needed on site.

What does the strength of an anchor bolt in concrete depend on?

The strength of an anchor bolt in concrete depends on three parameters: the strength class of the steel, the embedment depth and the concrete class of the foundation. The design values come from the structural design - our role is to supply an element with confirmed mechanical properties and a 3.1 certificate for the batch.

Elgo expert advice

We are often asked why we pay so much attention to thread fit on fasteners that are hot-dip galvanized. The reason is simple - the thick coating protects very well against rust, but it adds material to the thread. That is why we closely supervise the hot-dip galvanizing process, checking the effect of the coating on thread tolerance and the fit of bolting assemblies for steel structures. Technically, this is the matching of internal and external threads. Without the right checks before and after galvanizing, tightening load-bearing bolts at height would be very difficult and could lead to thread seizure.

Staying with anti-corrosion coatings, one more common question is worth explaining. In the technical documentation of fasteners you can find two designations for zinc coatings: HDG and tZn. HDG (hot-dip galvanized) refers to a specific protection technology - hot-dip galvanizing. tZn indicates a zinc coating and its required thickness, but not the method of application (hot-dip, electroplated or zinc flake). Depending on the project specification, a zinc coating marked tZn can be applied by different methods, as long as it meets the standard requirements for thickness and protective properties.

Own production and experience since 1971

Elgo is a European manufacturer of fasteners, with experience in the fastener industry going back to 1971. Our main strength is our own, well-equipped machining shop, which gives us independence and efficient processing of materials.

We manufacture threaded rods cut to length and specialist bolts for steel structures, including HV and SB bolting assemblies. For the oil & gas and chemical industries we make fasteners for pressure equipment and piping (PED), processing certified heat-resistant and boiler steels such as 25CrMo4 and 42CrMo4 - fasteners for flanged joints and non-standard drawing-based parts with complete inspection documentation for the notified body.

Our team includes qualified technical advisers who support engineers in selecting materials for the loads. Whether your project needs non-standard parts in special materials made to drawing, or a fast quote and the kitting of large deliveries to site, our specialists will handle it - contact our sales team.