European manufacturer of specialist fasteners. Industry expertise since 1971
Hot-dip galvanized bolts and fasteners (HDG) for demanding applications
Need hot-dip galvanized bolts, threaded rods, nuts, anchor bolts or parts made to drawing? Elgo covers the whole process: technical verification of the material, production and kitting, spin galvanizing to EN ISO 10684, coating and thread fit checks, documentation and delivery.
We also hot-dip galvanize customer-supplied fasteners - for customers in Poland and abroad - where a general galvanizing approach is not enough for threaded parts.
Ways to work with us
Two ways to work with us: HDG fasteners or hot-dip galvanizing of your fasteners
We supply finished hot-dip galvanized fasteners and galvanize fasteners supplied by the customer. In both cases the result is the same: a coating matched to the working environment, verified zinc quality and adhesion, correct thread fit, a complete batch and documentation agreed for the project.
You buy hot-dip galvanized bolts, nuts and washers
We supply bolts, threaded rods, nuts, washers, anchor bolts, bolting sets and parts to drawing - hot-dip galvanized (HDG). Depending on the requirements, we verify a standard product from our range or manufacture a non-standard part, with galvanizing as part of the whole process.
- Standard HDG bolts and other hot-dip galvanized fasteners
- Special production to drawing or specification
- Kitting of many items into one delivery
- Documentation and batch traceability
Full service for hot-dip galvanized fasteners. From analysing the requirements and verifying the solution, through production or kitting and galvanizing, to coating and thread fit checks, documentation and delivery.
Send inquiryYou send your fasteners for hot-dip galvanizing
We accept customer-supplied fasteners - from Poland and abroad - and hot-dip galvanize them in our own plant: spin galvanizing of bolts and other fasteners to EN ISO 10684, with control of preparation, coating quality and thread fit, and documentation agreed for each batch.
- Your own bolts, threaded rods, nuts, anchor bolts, sets or parts to drawing
- Coating matched to the working environment of the part
- Coating thickness, adhesion and continuity checked
- Thread fit checked after hot-dip galvanizing
- Repeatable coating parameters from batch to batch
- A fixed service model for larger or recurring volumes
For companies that have their own fasteners but need a hot-dip galvanizing service matched to threads, fit and documentation - not a general galvanizing approach designed for structural steel.
Send inquiryWhen to contact us
Non-standard HDG fasteners made to drawing
Not every case can be solved by buying a standard bolt, rod or nut from stock. In many projects what matters is not only the availability of a hot-dip galvanized fastener, but also its size, strength class, material, thread, documentation and a complete batch.
Contact Elgo if:
- you need hot-dip galvanized fasteners outside the standard range
- you have a technical drawing or a project specification
- you need a non-standard length, diameter, strength class or material
- correct thread fit after galvanizing is important
- the delivery must cover many items and documentation
- you have your own fasteners for hot-dip galvanizing
- you are looking for a fixed service for repeat batches or larger volumes
Product range
Galvanised bolts, nuts, washers and threaded rods
We handle orders for finished galvanised nuts and bolts as well as special versions matched to the customer's documentation.
Galvanised threaded rods and anchor bolts
Standard lengths, cut to length and made for the project - see DIN 976 threaded rods and galvanised anchor bolts for steel structures.
Hot-dip galvanized bolts
HDG bolts - in UK English, galvanised bolts - are the standard choice for environments in corrosivity category C3 and above. Standard, special and verified for the application.
Galvanised nuts
Matched to the thread fit after galvanizing - including oversize nuts tapped after coating.
Galvanised washers
For bolting sets and project kits.
Parts to drawing
Production and hot-dip galvanizing to the customer's documentation.
Technical knowledge
Hot-dip galvanizing of fasteners: spin galvanizing, thread fit and class 10.9
A part that looks right after galvanizing still has to meet three conditions: protect against corrosion for the planned service life, assemble correctly and pass acceptance. Fasteners for demanding conditions work in corrosivity categories C3-C5, where durability depends on the thickness and quality of the coating. We treat hot-dip galvanizing (HDG) not as a separate process, but as part of the whole technical solution.
Spin galvanizing of bolts and nuts
Bolts, nuts and other small parts are hot-dip galvanized by spin (centrifugal) galvanizing - in UK English, spin galvanising. After dipping, the parts are spun to remove excess zinc, so the coating is even and the thread stays usable.
Coating quality and thickness
Coating thickness depends on the corrosivity category of the environment and on the size of the part. For fasteners, the coating requirements are set by EN ISO 10684. We match the coating to the conditions stated in the project and, after the process, check thickness, adhesion and continuity on the finished part.
Process matched to the strength class
For class 10.9 fasteners, the parameters of the galvanizing process matter. For this class we use low-temperature hot-dip galvanizing.
Thread fit after hot-dip galvanizing
The zinc coating increases the size of the part, so threaded parts need allowance. We use both systems described in EN ISO 10684: nuts tapped oversize after galvanizing (marked Z) and bolts with undersize threads (marked U). The two systems are not mixed - bolts and nuts are supplied as a matched set.
Complete batches
In many projects what counts is not a single item, but the whole batch: bolts, nuts, washers and anchor bolts. We make sure the delivery is complete and matches the agreed scope.
Documentation
The scope of documentation - certificates, coating reports, traceability, CE - is agreed at the inquiry stage, so it matches the acceptance requirements and the customer's procedures.
Standards
EN ISO 10684 vs EN ISO 1461 - which standard applies to fasteners?
EN ISO 1461 covers hot-dip galvanized coatings on fabricated iron and steel articles - structures, profiles and plates. Threaded fasteners have their own standard: EN ISO 10684. It sets the requirements for spun hot-dip galvanized coatings on bolts, nuts and washers, including thread tolerances and the oversize and undersize thread systems.
We galvanize fasteners to EN ISO 10684. If a project specification refers only to EN ISO 1461 for fasteners, we clarify the requirements at the inquiry stage, so the coating and the thread fit match the intended use.
Choosing the coating
Hot-dip galvanized vs zinc plated vs zinc flake coating
Hot-dip galvanizing, zinc plating and zinc flake coatings are different technologies with different durability and uses. The choice depends on the working environment, the required coating thickness and the type of fastener. In documentation you may see different designations: HDG or tZn (hot-dip galvanized), Zn (zinc plated), flZn (zinc flake). They are not interchangeable. We help match the right finish to the application, the environment and the acceptance requirements. For structures to EN 1090 and in C3+ environments, HDG is the standard.
Hot-dip galvanizing (HDG, tZn)
Thick coating, long protection
- Thick, durable zinc coating
- Cathodic protection in C3-C5 environments
- For structures and outdoor use
- Thread allowance required
Zinc plating (Zn)
Thin coating, smooth threads
- Thin, even coating
- Good appearance, precise threads
- For low-corrosivity environments
- Shorter corrosion protection
Zinc flake coating (flZn)
Very thin coating, high resistance
- Very thin zinc flake coating
- Good corrosion resistance at low thickness
- For parts with tight tolerances
- Temperature and mechanical limits
HDG vs tZn - what is the difference?
The designations HDG (hot-dip galvanized) and tZn both refer to hot-dip zinc coatings, but they do not mean exactly the same. The difference lies mainly in the coating thickness and how it is checked - and, in practice, in durability and in the fit of the fastener.
In projects with higher corrosion protection requirements, what counts is not the name of the coating, but its actual thickness, repeatability and compliance with the standard. That is why we agree at the inquiry stage which coating parameters are required and how they are to be confirmed.
Documentation
Documentation for every HDG batch
In industrial, structural and infrastructure projects, documentation often decides whether a delivery is accepted. We agree its scope at the inquiry stage.
EN 10204 3.1 material certificate
Chemical composition, mechanical properties and heat number - for each batch, if required for the material or application.
HDG coating report
Documentation of coating quality or thickness to EN ISO 10684, if required by the project, the standard or the acceptance procedure.
Batch traceability
Links between the batch, the documents and the requirements - for example when fasteners are galvanized for a specific environment - tracking the material from the source to the site.
CE declarations and documents of conformity
Prepared when required by the application, the project or technical acceptance to EN 1090.
The scope of documentation depends on the project requirements and the application - we do not impose a standard set. We agree it with the customer, so the delivery meets the acceptance requirements and internal procedures.
FAQ
Frequently asked questions
Do you supply only finished hot-dip galvanized fasteners?
No. We supply finished HDG fasteners, but we also make non-standard parts and parts to drawing. We also hot-dip galvanize customer-supplied fasteners - with full control of the coating, the thread fit and the documentation.
Can I send my own fasteners for hot-dip galvanizing?
Yes. We accept customer-supplied bolts, threaded rods, nuts and anchor bolts - also from customers outside Poland - and galvanize them in our own plant. Before accepting a batch, we agree the required coating, how the thread is to be treated and the scope of documentation. The parts are returned checked for coating and thread fit.
What is the difference between ISO 1461 and ISO 10684?
ISO 1461 covers hot-dip galvanized coatings on fabricated steel articles, such as structures and profiles. ISO 10684 is the standard for hot-dip galvanized fasteners - it covers spun coatings on bolts, nuts and washers, thread tolerances and the oversize and undersize thread systems. We galvanize fasteners to EN ISO 10684.
What is spin galvanizing?
Spin galvanizing (centrifugal galvanizing) is the hot-dip galvanizing process used for bolts, nuts and other small parts. After dipping in molten zinc, the parts are spun in a basket to remove excess zinc, which gives an even coating and keeps the thread usable. We spin galvanize fasteners in our own plant.
Why are galvanized nuts tapped oversize?
Galvanized nuts are tapped oversize because the zinc coating on the bolt thread increases its size. EN ISO 10684 describes two systems: nuts tapped oversize after galvanizing (marked Z) with standard bolts, or bolts with undersize threads (marked U) with standard nuts. We use both systems and supply bolts and nuts as a matched set - the two systems are never mixed.
Can 10.9 bolts be hot-dip galvanized?
Yes, 10.9 bolts can be hot-dip galvanized when the process is matched to this strength class. For class 10.9 we use low-temperature hot-dip galvanizing and verify at the inquiry stage whether HDG is the right solution for the application.
Can every fastener be hot-dip galvanized?
Not always. The material, strength class, geometry of the fastener, project requirements and working conditions all matter. That is why it is worth verifying before production whether hot-dip galvanizing is the right solution - and that is what we do at the inquiry stage.
Is hot-dip galvanized better than zinc plated?
Hot-dip galvanized bolts have a much thicker zinc coating than zinc plated bolts, so they perform better outdoors and in corrosive environments (corrosivity categories C3, C4 and C5 according to ISO 9223 and EN ISO 12944-2). The HDG coating is metallurgically bonded to the steel. Zinc plating is thinner and is used in lighter applications. The two coatings are not interchangeable.
How thick is hot-dip galvanizing on bolts?
The coating thickness on bolts depends on the corrosivity category of the environment and on the size of the fastener; the requirements for fasteners are set by EN ISO 10684. We confirm the right value for a specific project at the inquiry stage, taking into account its effect on the thread fit.
What documentation do you supply with HDG fasteners?
The documentation for HDG fasteners depends on the project requirements. It can include an EN 10204 3.1 material certificate, a coating report to EN ISO 10684, batch traceability and CE declarations where required for the application. We agree the scope at the inquiry stage.
How do you check the coating after galvanizing?
After galvanizing, we check the coating thickness, its adhesion to the steel and its continuity over the whole surface, including the thread. For fasteners used in demanding conditions, we also check that the coating does not affect the fit of the bolt and nut. The results are documented in the scope agreed for the batch.
How is galvanizing bolts different from galvanizing steel structures?
In steel structures, what matters most is an even coating of the right thickness. Fasteners also have a thread - a surface with precise geometry where excess zinc prevents assembly. Galvanizing bolts therefore requires spin galvanizing, control of the coating and the fit of the bolt and nut, and - for some products - preparation of the thread before the process.
How is the price of hot-dip galvanizing calculated?
The price of hot-dip galvanizing depends mainly on the weight and quantity of the parts, the type of fastener, how the thread is to be treated and the required documentation. Send a list of items or a drawing with quantities - we will reply with a quote for the batch.
About Elgo
Specialised in fasteners - from production to hot-dip galvanizing
We manufacture and supply fasteners, with experience in the fastener industry going back to 1971. Years of working with this range - from production to order to wholesale distribution - have taught us the processes that general galvanizers often struggle with, such as correct hot-dip galvanizing of a bolt and its thread.
We care about technological consistency: we verify the material and the coating thickness for the working conditions, check the zinc quality on the finished product and make sure of a precise fit, so long-lasting corrosion protection does not make assembly harder. Hot-dip galvanizing is carried out in our own plant in Poland and is our specialisation - but it is only part of a wider offer:
PED fasteners for pressure equipment
Bolts, nuts and washers for pressure equipment - in heat-resistant materials, in line with Directive 2014/68/EU.
Go to page →Anchor bolts and fasteners for steel structures
HV and SB bolts, nuts, washers, threaded rods and foundation anchor bolts to EN 14399, EN 15048 and DIN 976.
Go to page →Custom fasteners made to drawing
Special fasteners made to the customer's documentation - where the standard catalogue ends.
Go to page →DIN 976 threaded rods made to order
M4 to M80, up to 6000 mm, cut to length and hot-dip galvanized when required.
Go to page →Have a project with hot-dip galvanized fasteners?
Send a drawing, specification, item list or a description of your requirements. We will check whether the best solution is a standard product, special production, hot-dip galvanizing of your fasteners or kitting of the whole batch.